1. M.I.T. Tzini, P.I. Sarafoglou, A. Stieben, G.N. Haidemenopoulos, W. Bleck, Austenite evolution and solute partitioning during thermal cycling in the intercritical range of a medium-Mn steel, Steel Research International, in-press accepted manuscript, 2016. 
  2. Z. Cai, H. Ding, H. Kamoutsi, G.N. Haidemenopoulos, R.D.K. Misra, Interplay between deformation behavior and mechanical properties of intercritically annealed and tempered medium-manganese transformation-induced plasticity steel, Materials Science and Enginnering A, 654, pp.359-367, 2016. 
  3. H. Kamoutsi, E. Gioti, G.N. Haidemenopoulos, Z. Cai and H. Ding, Kinetics of solute partitioning during intercritical annealing of a medium-Mn steel, Metallurgical and Materials Transactions A, 46, No.11, pp. 4841-4846, 2015. 
  4. P.I. Sarafoglou, M.I.T. Tzini and G.N. Haidemenopoulos, Simulation of cyclic transformations in the intercritical range of a 5Mn steel, Int. Journal of Materials and Metallurgical Engineering, 1:104, 2015. 
  5. G.F. Samaras and G.N. Haidemenopoulos, Carburization of high-temperature steels: A simulation-based ranking of carburization resistance, Engineering Failure Analysis, 51, pp.29-36, 2015. 
  6. P.I. Sarafoglou and G.N. Haidemenopoulos, Phase Fraction Mapping in the As-Cast Microstructure of Extrudable 6xxx Aluminum Alloys, Int. Journal of Materials Research 105, No.12, pp. 1202-1208, 2014. 
  7. G.N. Haidemenopoulos, N. Aravas and I. Bellas, Kinetics of Strain-Induced Transformation of Dispersed Austenite in Low-Alloy TRIP Steels, Materials Science and Engineering A 615, pp.416-413, 2014. 
  8. G.N. Haidemenopoulos, H. Kamoutsi and A.D. Zervaki, Simulation of the transformation of iron intermetallics during homogenization of 6xxx series extrudable aluminum alloys, Journal of Materials Processing Technology, 212, pp. 2255-2260, 2012. 
  9. G.N. Haidemenopoulos, A. Katsamas and H. Kamoutsi, Thermodynamics-Based Computational Design of Al-Mg-Zr-Sc Alloys, Metallurgical and Materials Transactions A Vol.41(4), p.888-899, 2010. 
  10. S. Samaras and G.N. Haidemenopoulos, Modelling of Segregation and Homogenization of 6061 Extrudable Al-Alloy, Journal of Materials Processing Technology, Vol.194, pp.63-73, 2007. 
  11. A.D. Zervaki & G.N. Haidemenopoulos, Computational Kinetics Simulation of the Dissolution and Coarsening in the HAZ during Laser Welding of 6061-T6 Al-alloy, Welding Journal, Vol.86, pp. 211s-221s, 2007. 
  12. G.N. Haidemenopoulos, Coupled Thermodynamic / Kinetic Analysis of Diffusional Transformations During Laser Hardening and Laser Welding, Journal of Alloys and Compounds, 320, pp.302-307, 2001. 
  13. A.I. Katsamas, A.N. Vasilakos and G.N. Haidemenopoulos, Simulation of Intercritical Annealing in Low-alloy TRIP Steels, Steel Research, 71, No.9, pp.351-356, 2000. 
  14. A.I. Katsamas and G.N. Haidemenopoulos, Surface Hardening of Low Alloy 15CrNi6 Steel by CO2 Laser Beam, Surface & Coatings Technology, 115, p.249-255, 1999. 
  15. G.N. Haidemenopoulos and A. Vasilakos, Modelling of Austenite Stability in Low-Alloy Triple-Phase Steels, Steel Research, 67, Nο.11, p. 513-519, 1996. 
  16. G.N. Haidemenopoulos, Austenite Stabilization from Direct Cementite Conversion in Low-Alloy Steels, Steel Research, 67, No.3, p.93-99, 1996 (Nominated for Best Paper Award 1996 in Steel Research). 
  17. G.N. Haidemenopoulos, M. Grujicic, G.B. Olson, and M. Cohen, Thermodynamics-Based Alloy Design Criteria for Austenite Stabilization in the Fe-Ni-Co System, Journal of Alloys and Compounds, Vol.220, p.142-147, 1995. 
  18. G.N. Haidemenopoulos, M. Grujicic, G.B. Olson, and Morris Cohen, On the Optimization of Precipitated Austenite for the Transformation Toughening of Steels, CALPHAD, Vol.13, No.3, p.207-216, 1989. 
  19. M. Grujicic and G.N. Haidemenopoulos, A Treatment of Paraequilibrium Thermodynamics Using the Thermocalc Software and Database, CALPHAD, Vol.12, No.2, p.187-192 , 1988.